Skip to main content

App- CTA

Overview

The App CTA section in VirtuApp is used to configure floating buttons and control their placement along the edges of the application interface.

1. Navigation Path

Settings → VirtuApp → App CTA

2. Add Floating Button

The Add Floating Button panel contains the following configuration fields:

Field Description Available Options
Edge Defines the screen edge where the floating button will appear. Left, Right, Top, Bottom
Position Defines the button's position along the selected edge. Start, Center, End

3. Configuration Steps

  1. Navigate to Settings → VirtuApp → App CTA.
  2. Under Add Floating Button, select the required Edge.
  3. Select the desired Position along the chosen edge.
  4. Complete any additional fields displayed by the interface, if applicable.
  5. Save the configuration, if a Save option is available.

4. Edge and Position Reference

Edge Position Expected Placement
Left Start Upper end of the left edge
Left Center Middle of the left edge
Left End Lower end of the left edge
Right Start Upper end of the right edge
Right Center Middle of the right edge
Right End Lower end of the right edge
Top Start Left end of the top edge
Top Center Middle of the top edge
Top End Right end of the top edge
Bottom Start Left end of the bottom edge
Bottom Center Middle of the bottom edge
Bottom End Right end of the bottom edge

5. Expected Behavior

  • The selected Edge determines which side of the application displays the floating button.
  • The selected Position determines whether the button appears at the start, center, or end of that edge.
  • The configured placement should be reflected in the VirtuApp interface after the settings are saved and applied.
Back to top